Filter
Top Products
9-44
COPYRIGHT
©
2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
Figure 9-C722
Figure 9-C723
4) Remove the two screws [3], and discon-
nect the conector [4]; then, detach the
power supply cooling fan 1 [5].
12. Removing the Power Supply
Cooling Fan 2
1) Remove the lower left cover.
2) Remove the power supply unit.
3) Remove the three screws [1], and detach
the fan mount [2]. (See Figure 9-C721.)
4) Remove the two screws [3], and discon-
nect the connector [4]; then, detach the
power supply cooling fan 2 [5].
Caution:
When mounting the power supply cool-
ing fan 2, be sure that the direction of air
current matches the marking on the fan.
(See Figure 9-C720)
[3] [5]
[3]
[4]
[3]
[5]
[4] [3]