Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
13-221
CHAPTER 13 TROUBLESHOOTING
<INSTALL>
Operations for Installation
<CCD>
Executing Auto Adjustment for CCD/Shading-Related Items
Level 3
TONER-
S
Description
Supplying Toner from the Toner Cartridge to the
Hopper/Developing Assembly and Stirring the Toner
Inside the Developing Assembly
Operation
Select TONER-S to highlight, and press the OK key.
(The operation ends in about 10 min.)
Caution:
1. Before pressing the OK key, check to be sure
that the developing assembly is fitted securely.
2. Do not turn off the power while the machine is
in operation.
Remarks
• A count-down number is
indicated to the right of
TONER-S during
operation.
• No key except the Stop
key is enabled during
operation.
Level 3
CCD-
ADJ
Description
Executing Auto Adjustment for Shading
Operation
1) Place standard white paper* (10 sheets or more) on
the copyboard glass.
2) Select CCD-ADJ to highlight, and press the Ok key.
3) See that the machine has entered auto adjustment
mode. (The adjustment ends in about 1 min.)
4) Record all items under COPIER>ADJUST>CCD and
the data under COPIER>ADJUST>LAMP>L-DATA
on the service label when they have been updated.
* Whitest of all papar used by the user (except paper
for a color copier).
Remarks
If you have replaced the
CCD unit, scanning lamp,
image processor PCB, or
standard white plate,
execute this mode.
Standard white paper
COPIER>FUNCTION