Filter
Top Products
COPYRIGHT
©
2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
12-15
CHAPTER 12 MAINTENANCE AND SERVICING
11) Tighten the screws on the blade retaining
plate in the order indicated.
• Tighten temporarily for screws 1
through 5.
Caution 1:
While the blade is held in place with the
plate, tighten the screws temporarily.
• Tighten fully for screws 6 trough 10.
Caution 2:
When mounting the cleaning blade, be
sure to put the blade auxiliary plate be-
tween the blade support plate and the
blade back plate.
12) Apply toner on the cleaning blade where it
comes into contact with the photosensi-
tive drum; then, mount the cleaning blade.
Caution 3:
After mounting the cleaning blade, ro-
tate the drum; if toner slips through the
blade, repeat the foregoing steps. If the
fault is not corrected, replace the blade.
Figure 12-409
Figure 12-410
Blade support plate
Blade auxiliary plate
Blade back plate