Filter
Top Products
CHAPTER 5 LASER EXPOSURE SYSTEM
5-6
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
Related Service Mode
COPIER>ADJUST>LASER>PVE-OFST
(laser projection position adjustment)
If you have replaced the image processor PCB or
initialized the RAM on the image processor PCB, enter
the adjustment value.
Setting range: -300 to 300
Note that the laser A move in sync with the laser B.
(front)
Lower setting Higher setting
(rear)
Laser B
[1] If the BD signal is not detected within a specific period of time.
[2] See the descriptions under III.C "Controlling the Laser Intensity."
E100
(BD error)
Related Error Code