Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
7-25
CHAPTER 7 PICK-UP/FEEDING SYSTEM
C. Controlling the Reversal Motor (M11)
1. Outline
Table 7-401 shows the function of the reversal motor control circuit, and Figure 7-404 is a
block diagram of the circuit.
Table 7-401
Figure 7-404
Motor
driver
(IC1)
+24V
+24V
A
A*
B
B*
M11
A9
A11
A8
A7
A10
A6
FU3
Interface
circuit
Interface
circuit
Interface
circuit
A5
A6
A7
A8
A8
A7
A6
A5
J3602J519 J3603
DUPI-OFF
DUPI-B
DUPI-A
DC controller
PCB
No-stacking feeding
driver PCB
CPU
(IC13)
Phase B excitation control signal
Phase A excitation control signal
When the M11 drive signal goes '1',
the pickup motor starts to rotate.
When the M11 drive signal goes '0',
the pickup motor stops.
Description
Supplies 24 V from the no-stacking feeder driver PCB.
Signal (DUPI_OFF) from the DC controller PCB.
See Figure 7-401.
ON/OFF control
Direction control
No error code; however, if a fault in the drive of the motor, a jam will occur.
Item
Power supply
Drive signal
Operating/drive
assembly
Control
Error detection