Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
13-233
CHAPTER 13 TROUBLESHOOTING
<BODY>
Selecting Copier-Related Machine Settings
Level 3
PO-CNT
MODEL-
SZ
TRNSG-
SW
FIX-
TEMP
CPMKP-
SW
IDL-
MODE
Description
Use it to turn on/off potential control.
Use it to select the site (country) of installation for the
feeder.
• This changes the way the default ratios are displayed
and how the feeder identifies the size of originals.
Use it to select transfer guide bias control mode.
• If transfer faults occur in images, increase the
settings.
Use it to select a down sequence operating
temperature for thick paper.
• This is effective if CPMKP-SW is set to ON.
Use it to turn on/off the down sequence for thick
paper.
Use it to select idle rotation mode for the developing
assembly.
• If the images are distorted or the density is too low
(light), select '1' or '2'.
Remarks
0: off
1: on (default)
0: AB (6R5E)
1: Inch (5R4E)
2: A (3R3E)
3: AB/Inch (6R5E)
0: for extremely high
humidity, +200 V
1: fixed at +600 V
2: fixed at +200 V
3: for extremely high
humidity, +200 V
(default)
4: if not low humidity,
+200 V
0: 170°C
1: 175°C
2: 180°C
3: 185°C
4: 190°C
5: 195°C
0: off (default)
1: on
0: auto control by the
environment sensor
(default)
Low humidity: idle
rotation.
normal/high humidity:
start idle rotation when
the control panel soft
switch is turned on
1: start idle rogation when
temperature of fixing
roller reaches 100°C
2: start idle rotation when
control panel soft
switch is turned on
COPIER>OPTION