Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
11-45
CHAPTER 11 INSTALLATION
7) Press the switch (SW2) on the controller
to start service mode.
8) Select the appropriate input method:
8.1)Input by keys on the Numeric Keypad-A1
for 'card' or 'ID' (initially, 'card').
8.2)To change from 'card' to 'ID,' perform the
following using the keys on the keypad:
To change 'ID' to 'card,' on the other hand
(requiring the Card Reader-A1), go to 8-
4).
MANAGE-CARD is indicated.
8.3)Press the '2' key, and press the ENT key.
MANAGE-ID is indicated.
8.4) To change to card input,
When MANAGE-ID is indicated, press
the '1' key, and then press the ENT key.
MANAGE-CARD will be indicated.
SW2
16
SW4
SW1
ON
SW5
ON
LED6LED5LED4
LED3LED2LED1
SW2
SW3
JB2
JB1
JA1
JA2
EPROM
SRAM
CPU
IPC
JC9
JC6
JC5
JC8
J5
16
Photocoupler
Code
Input method
1 Card
2ID
Figure 11-C607
Table 11-C601