COPYRIGHT
©
2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
13-159
CHAPTER 13 TROUBLESHOOTING
c. After Downloading
1) Turn off the copier’s main power switch, and disconnect the power plug.
2) Turn off the PC.
3) Disconnect the bi-Centronics cable from the PC and the copier.
4) Slide the download switch to the COPY position, and connect the two connectors.
Figure 13-707
5) Close the connector cover, and close the front door.
6) Turn on the main power switch and the control panel power switch.
7) Start service mode, and check the ROM version:
COPIER>DISPLAY>VERSION
COPY
Switch for down loading
Connectors