Filter
Top Products
CHAPTER 7 PICK-UP/FEEDING SYSTEM
7-80
COPYRIGHT
©
2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[4]
[3]
[5]
No gap.
[3]
[4]
[2]
[2]
[1]
Figure 7-F808
Figure 7-F809
3) Disconnect the connector [3], and remove
the screw [4]; then, detach the horizontal
registration motor [5].
7. Removing the Deck (left) Draw-
Out Clutch/Lower Feeder Middle
Clutch
1) Remove the duplexing unit from the
copier.
2) Remove the front cover.
3) Remove the two set screws [2] to detach
the locking ring [1]; then, disconnect the
connector [3], and detach the clutch [4].
(Be sure to perform this for each pair.)