Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
13-6
Work
Part Tool/solvent
Tool/solvent
Manual feed tray, pickup
roller, feeding roller
Vertical path roller
Alcohol and
lint-free paper
Alcohol and
lint-free paper
Cleaning.
Cleaning.
Part
Primary charging assembly,
transfer/separation assembly,
pre-transfer assembly
*Make sure no droplet of water remains.
*Make sure no droplet of water remains.
Part
Pre-exposure lamp
Copyboard glass
Scanning lamp
Standard white plate
Reflecting plate
No. 1 mirror through
No. 3 mirror
Tool/solvent
Alcohol
Alcohol
Lint-free paper
Lint-free paper
Blower brush
Blower brush
or lint-free
paper
Cleaning.
Cleaning.
Dry wiping.
Dry wiping.
Cleaning.
Cleaning by a blower brush;
if dirt is excessive, cleaning
with lint-free paper.
Separation claw
Upper roller,
lower roller
Paper guide
Re-pickup assembly,
reversing roller
Re-pickup assembly,
pickup roller,
registration roller
Feeding assembly
Solvent and
lint-free paper
Cleaning oil,
lint-free paper
Solvent and
lint-free paper
Alcohol, lint-
free paper
Moist cloth*
Alcohol and
lint-free paper
Work
Cleaning.
Cleaning.
Cleaning.
Cleaning.
Cleaning.
Cleaning.
Dust-proofing glass
Developing assembly mount
Dust-collecting roller
Registration roller
Tool/solvent
Alcohol and
lint-free paper
Lint-free paper
Alcohol and
lint-free paper
Moist cloth*
Work
Dry wiping; then,
cleaning with lint-free
paper moistened with
alcohol.
Cleaning
Disposing of toner
collecting around the
dust-collecting roller.
Cleaning.
Cleaning.
Part
Work
B . Points to Note for Scheduled Servicing
Caution:
• Check to make sure that the block (front, rear) is free of melting, thermal deformation, cracking,
or yellowing because of leakage. If noted, replace it with a new part.
• Check and clean as far as the inside of the block (front, rear).
• Do not use a cloth soiled with metal powder for cleaning.
• Do not use a moist cloth. Instead, dry wipe with lint-free paper, and then use alcohol;
thereafter, make sure that alcohol has completely evaporated before mounting to the copier.
• Try to finish scheduled servicing and scheduled replacement within a specific period of time.