Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
11-51
CHAPTER 11 INSTALLATION
Figure 11-C612
Figure 11-C613
Figure 11-C614
11.5) Check to make sure that the Numeric
Keypad-A1 indicates the following; then,
disconnect the keypad.
12) Attach the switch settings label [6] to the
cover [5] of the controller, and record the
latest switch settings on the label.
13) Secure the cover of the controller with
two screws [7]. When doing so, check to
make sure that the cable of the power sup-
ply unit is fitted to the cable guide and is
not trapped by the upper cover.
14) To Connect the Control Card Printer-A1,
connect it to the connector J4 of the con-
troller. (As necessary, use a relay cable.)
[7]
[5]
[7]
[6]
J4