Filter
Top Products
10-30
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 10 SIDE PAPER DECK
Figure 10-B308
Figure 10-B309
3. Changing the Deck Paper Size
If the user wishes to change the paper size
of the deck, perform the following:
1) Open the compartment of the deck, and
remove all paper.
2) If the lifter of the deck is up, turn on the
copier's power switch, and push down the
sensor lever [2] of the paper supply posi-
tion sensor inside the compartment [1] to
move down the lifter to its lower limit.
3) Remove the screw [3], and mount the pa-
per trailing edge guide plate [4] to suit the
new paper size.
4) Likewise, remove one screw each [5], and
mount the left and right guide plates [6] to
suit the new paper size.
5) Enter the new paper size in the copier's
service mode (OPTION>ACC>DK-P).
[2]
[1]
[4] [3] [5]
[6]