Filter
Top Products
CHAPTER 13 TROUBLESHOOTING
13-38
COPYRIGHT
©
2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
2 Checking the Laser Power
Image processor cover
Laser power checker inlet cover
1) Check to make sure that the data lamp on the control panel is off, and turn off the main power
switch.
2) Disconnect the power plug from the power outlet.
3) Remove the image processor cover according to the instructions in the following: Chapter
4>IV.B "Removing the Image Processor PCB."
Figure 13-F201
4) Open the laser power checker inlet cover.
Figure 13-F202
5) Shift the switch on the laser power checker (FY9-4008) to '2'.