Filter
Top Products
9-34
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
Figure 9-C702
[1] [2] [1]
[3] [2]
Figure 9-C701
C. Fans
1. Removing the Primary Charging
Assembly Fan
1) Open the front door.
2) Remove the inside cover (process unit).
3) Remove the inside upper cover.
4) Remove the two screws [1], and slide out
the primary charging fan [2].
Caution:
When mounting the primary charging
assembly fan, be sure that the direction
of air current matches the marking indi-
cated on the fan.
5) Disconnect the connector [3] found on the
back of the fan, and detach the primary
charging assembly fan [2].