Filter
Top Products
CHAPTER 7 PICK-UP/FEEDING SYSTEM
7-60
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[5]
[4]
[4]
[6]
Urethane sponge pieces
Figure 7-B811
Figure 7-B812
Figure 7-B813
2) Remove the two mounting screws [4], and
remove the separation roller assembly [5]
from the joint. (If for the pickup assembly
of the front deck left, remove one screw.)
3) Detach the separation roller [6] from the
separation roller shaft mount.
Caution:
Initially, the urethane sponge of the part
is pink, and changes over time (acceler-
ated if exposed to light).
Its tone will change from pink to orange
and to yellow; it is a general characteris-
tic of urethane sponge, and no physical
deterioration (in performance) exists be-
cause of changes in color, and the part is
not identified by color.