Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
9-53
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
[2] [2]
[2]
[2]
[1]
[1]
[1]
[1]
[3]
6. Removing the Multifeeder Pickup
Drive Assembly
Construction
1) Remove the rear cover.
2) Remove the high-voltage transformer
(DC).
3) Loosen the mounting screw on the rear
fixing plate of the registration roller as-
sembly.
4) Remove the four screws [1], and discon-
nect the four connectors [2]; then, detach
the multifeeder pickup drive assembly
[3].
Figure 9-D708