Filter
Top Products
CHAPTER 13 TROUBLESHOOTING
13-222
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
Description
Registering the Paper Width Basic Value for the
Cassette 3/4
Operation
1) Set paper of the STMTR size in the cassette, and
adjust the side guide plate to its width.
2) Select C3-STMTR (C4-STMTR) to highlight, and
press the OK key.
• The new setting will be stored under C3-STMTR
(C4-STMTR).
3) Repeat steps 1) and 2) for A4R size.
Registering the Paper Width Basic Value for the
Manual Feed Tray
Operation
1) Place A4R paper on the manual feed tray, and adjust
the side guide to its width.
2) Select MF-A4R to highlight, and press the OK key.
The new setting will be stored under MF-A4R.
3) Repeat steps 1) and 2) for A6R and A4 sizes.
<CST>
Storing the Cassette/Manual Feed Tray Paper Width
<LASER>
Laser-Related Operations
<DPC>
Executing Automatic Adjustment of Photosensitive Drum Potential-Related Items
Level 3
POWER-
A
POWER-
B
Description
Turning On the Laser
Operation
1) Select POWER-A or POWER-B to highlight, and
press the OK key.
2) See that the selected laser turns on and SERVICE is
indicated in the upper right of the screen.
3) See that the laser turns off automatically in about 30
sec.
To turn off the laser before that, press the Stop key.
Remarks
Level 3
OFST
Description
Adjusting the Potential Sensor Offset
Operation
1) Select OFST to highlight, and press the OK key.
Remarks
• This item is one of
series of procedures
executed after replacing
the potential sensor. Do
not use it on its own. For
details, See II.C. "Image
Formation."
Level 3
C3-
STMTR
C3-A4R
C4-
STMTR
C4-A4R
MF-A4R
MF-A6R
MF-A4
Remarks
STMTR width : 139.5 mm
A4R width : 210 mm
• For fine-adjustment, use
the following: ADJUST
>CST-ADJ>C3-STM-
TR (C4-STMTR), C3-
A4R (C4-A4R).
A4R width:210 mm
A6R width:105 mm
A4 width: 297 mm
• For fine-adjustment, use
the following:
ADJUST>CST-
ADJ>MF-A4R, MF-
A6R, MF-A4.
COPIER>FUNCTION