Filter
Top Products
11-2
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 11 INSTALLATION
7. The area must have good current of air. If multiple copiers are expected, arrange so that the
exhaust from one copier will not be drawn into another. Further, avoid placing a copier near the
air vent of the room.
Figure 11-101
In general, the silicone gas* generated by a copier tends to soil corona charging wires, shortening
the wire life. Keep in mind that this is particularly true in a low humidity environment.
*Result of silicone oil evaporating from the fixing assembly.
Figure 11-102
Exhaust
Wrong 1
Wrong 2