Filter
Top Products
COPYRIGHT
©
2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
11-17
CHAPTER 11 INSTALLATION
I. Checking Images/Operations (user mode)
No.
1
2
3
4
5
6
Remarks
• Adjust the contrast of the control panel using the
control dial on the screen. Inform the user of how
the dial may be used.
• Check that the Supply Paper indicator has turned
on.
• Press the keys on the keypad and the Clear key to
make sure that the correct copy count is indicated.
Caution:
If you need to change the size of the deck
(R) or (L), see J. "Changing the Size of the
Front Deck (right and left)."
Marking A
Marking H
Stops
230V
Work
Push the releasing buttons of the cassettes
3 and 4; then, slide out the cassettes to the
front, and remove the packing material.
Set the side plates of the cassettes 3 and 4
against the holes (A4/A3) of the marking
M.
Fit the stops into the holes identified as
follows so that the bottom of the cassette
will not lift.
A: STMT-R
H: LTR-R
Caution:
This step applies only if the user
does not use Inch-configured paper.
Connect the power plug to the outlet;
then, turn on the main power switch and
the control panel power switch in
sequence.
Caution:
In the case of a 230V model,
connect the power plug that comes
with the unit to the copier before
making checks.
Caution:
Be sure grounding is properly made.
Otherwise, the leakage breaker can
fail to operate properly.
Place copy paper into the cassettes
according to paper size.
Attach the size stickers to the paper size
plate of the cassettes.
Set each cassette to the copier.