COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
9-19
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
Contents Retained for User Mode
Table 9-507
2. Image Processor PCB
Table 9-508 Back-Up Battery
CUSTOM
COMMON
SETTINGS
CUSTOM
COPY
SETTINGS
Uses
Life
Replacement
After replacement
• Retains counter readings.
• Retains contents shown in user mode. (Table 9-510)
• Retains contents shown in service mode. (Table 9-509)
• About 5 yr (with the power plug disconnected)
• When the image processor PCB is replaced (recharging is
not possible)
• Enter the values recorded on the service label.
• Sets the buzzer.
• Turns on/off the cassette auto
select mechanism.
• Sets the special tray.
• Selects printing priority.
• Changes power save mode.
• Enables/disables inch input.
• Selects paper icons.
• Sets system control
management IDs.
• Manage ID by group.
• Set Standard KEY 1,2
• Set AUTO ORIENTAITION
CUSTOM
COPY
SETTINGS
TIMER
SETTINGS
ADJUSTMENT/
CLEANING
• Selects print photo mode.
• Enables feeder manual feed
auto start.
• Changes fit-to-page mode.
• Enables/disables original
orientation auto detection.
• Change standard mode.
• Changes auto sleep time.
• Changes auto clear time.
• Changes low-power mode
shift time.
• Changes silent mode shift
time.
• Sets the weekly timer.
• Zoom fine adjustment