Filter
Top Products
CHAPTER 13 TROUBLESHOOTING
13-228
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
<MISC-R>
Checking the Scanning System
Level 3
SCANLAMP
PRE-
EXP
Description
Checking the Activation of the Scanning Lamp
Operation
1) Select the item to highlight, and press the OK key.
• The scanning lamp will turn on for about 3 sec and
then will turn off.
Checking the Activation of the Pre-exposure Lamp
Operation
1) Select the item to highlight, and press the OK key.
• The scanning lamp will turn on for about 3 sec and
then will turn off.
Remarks
<HRD-DISK>
Checking the Operation of the Hard Disk
Level 3
SCANDISK
FORMAT
Description
Detecting an Error on/Initializing the Hard Disk
• The operation starts, and the count is made starting at
0%; the operation ends at 100% (in about 25 min).
Initializing the Hard Disk (ends in about 1 sec).
Remarks
• Execute this mode if the
hard disk has some kind
of problem.
• Execute this mode for a
normal hard disk.
• Execute this mode at
time of shipment from
the factory or after
replacing the hard disk.
COPIER>FUNCTION