Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
3-7
CHAPTER 3 ORIGINAL EXPOSURE SYSTEM
Related Error Code
The No. 1 mirror mount does not reach the home position sensor within
a specific period of time.
E202
(scanner home position
detection error)
E204
(image leading edge
detection error)
[1] The image leading edge signal is not generated when the No. 1
mirror mount is moving forward.
[2] The image leading edge signal from the ADF is not generated in
stream reading mode.
Vertical
size plate
Standard white plate
Higher settingLower setting
Copyboard glass
Image leading edge sensor
Vertical
size plate
Standard white plate
Higher setting
Lower setting
Copyboard glass
HP sensor
Related Service Mode
Use it to adjust the image leading edge position by
entering a setting.
Setting range: 0 to 2970 (a change of 12 causes a
shift of 1 mm)
COPIER>ADJUST>ADJ-XY>ADJ-X
(scanner image leading edge position
adjustment)
Use it to adjust the home position (standard white
plate read position) by entering a setting.
If the standard white plate is soiled, use this mode
to avoid reading the soiled area.
Setting range: 0 to 4
COPIER>ADJUST>ADJ-XY>ADJ-S
(scanner home position adjustment)