Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
11-13
CHAPTER 11 INSTALLATION
E. Checking the Developing Assembly
No.
1
2
3
4
5
Work
Open the multifeeder tray, and remove
the screw from the door tape.
Take out the developing assembly from
the shipping box that comes with the
copier.
Turn the developing assembly cylinder
gear by hand, and check the cylinder
surface for damage.
Holding the center of the developing
assembly (pocket of the grip), mount it in
the copier. Then, connect two connectors.
Caution:
When mounting the developing
assembly, try inserting it from high
above, taking care not to bring the
developing cylinder into contact
with the metal plate of the develop-
ing assembly base.
Secure the developing assembly locking
unit in place with six screws (M4 × 6;
black; attachment).
Mount the door tape of the multifeeder
with a screw.
Remarks
Door tape
Connectors
Developing
assembly
Screws
Screws
Screws
Developing assembly