Filter
Top Products
11-50
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 11 INSTALLATION
11) Check the DIP switch settings as follows:
11.1) Set SW5-3 (DIP switch) of the con-
troller to OFF.
11.2) Using the v/ key, indicate the settings
of the DIP switches (SW1, SW5) of the
controller.
11.3) Check the settings of the DIP switches
(SW1, SW5) of the controller. (See Table
11-A601.)
If the settings are wrong, go back to "Set-
ting the Board" to make the appropriate
settings.
If you are setting the Interface Board-B1,
Interface Board-A1, or Communications
Control Board-A1 (accessories), see its
respective Installation Procedure.
11.4) Press the switch (SW2).
Figure 11-C610
Figure 11-C611
S1 S5
SW1-1
SW1-2
SW1-3
SW1-4
SW1-5
SW1-6
SW5-1
SW5-2
SW5-3
SW5-4
SW5-5
SW5-6
: bits are at ON.
: bits are at ON.
SW2
16
SW4
SW1
ON
SW5
ON
LED6LED5LED4
LED3LED2LED1
SW2
SW3
JB2
JB1
JA1
JA2
EPROM
SRAM
CPU
IPC
JC9
JC6
JC5
JC8
J5
16
SW5-3
16
Photocoupler
v