Filter
Top Products
CHAPTER 6 IMAGE FORMATION SYSTEM
6-30
COPYRIGHT
©
2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
Figure 6-312 Construction of the Cleaning Mechanism
4. Transfer Charging Assembly Cleaning Mechanism
Part 2>Chapter 5>10.1
Wires
Wire cleaner
rear
front
DC controller PCB
4
5
1
13
TSWC-FW
TSWC-HP
0V
TSWC-RV
J509A
J509B
1
6
7
13
Transfer
charging
assembly
Home position
sensor (MSW6)
Transfer/separation
charging wire
cleaning motor (M9)
Separation
charging
assembly
When the wire cleaner is at the home position, '0'.
When '1', the wire cleaner moves toward the rear.
When '1', the wire cleaner moves toward the front.
1. The surface temperature of the fixing roller is 100˚C or lower when the control panel power switch is
turned on.
2. The wire cleaning mechanism is turned on in user mode.
3. At the end of LSTR after making 2000 prints following wire cleaning.
Timing of Cleaning
The cleaner does not reach the home position within a
specific period of time.
E063
(wire cleaner home position error)
Related Error Code