Filter
Top Products
11-42
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 11 INSTALLATION
Figure 11-C601
Figure 11-C602
C. Checking the Operation
1) If the Communications Control Board-A1
or the Interface Board-B1 is not to be con-
nected (not requiring the Power Supply-
A1), go to step 4).
Connect the connector [1] of the power
supply to the connector [2] of the control-
ler securely as shown.
Check to make sure that the cord is in the
groove of the board.
2) Connect the power supply to the power
plug, and check to make sure that LED1
of the controller turns on.
[2]
[1]
Groove of the board
16
SW4
SW1
ON
SW5
ON
LED6LED5LED4
LED3LED2LED1
SW2
SW3
JB2
JB1
JA1
JA2
EPROM
SRAM
CPU
IPC
JC9
JC6
JC5
JC8
J5
16
LED1
Photocoupler