Filter
Top Products
CHAPTER 13 TROUBLESHOOTING
13-26
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
9.2 Position of the Fixing Cleaning Belt Solenoid (SL2)
8.6mm
Solenoid (SL2)
[1]
Figure 13-D211b
A
Solenoid (SL2)
[1]
a. If the Fixing Cleaning Belt is New
Adjust the position of the solenoid using the screw [1] so that the movement of the drive lever
will be over a distance of 8.6 mm.
Figure 13-D211a
b. If the Fixing Cleaning Belt Has Been in Use
Before removing the solenoid, take note of the position A of the drive lever when the solenoid
is on. After replacing the solenoid, adjust the position using the screw [1] so that it will be the same
as it was before removal when the solenoid turns on.