Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
9-5
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
Ref.
[1]
[2]
[3]
[4]
Counter
Copier
Printer
Remote Diagnostic
Device II (100/120
(UL) -V areas only)
Copy Data
Controller-A1
Count
Increments the count per
copier output.
[5] Control Card V
(accessory)
The count is incremented for
copy output. (The count is not
incremented for printer output.
However, it is incremented for
an output using the mail box
requiring a card.)
Increments per printer output.
The count is incremented for
copy output. (The count is not
incremented for printer output.
However, it is incremented for
an output using the mail box
requiring a card.)
Count increment
[Single-Sided Image]
PI6 or S3 of the
finisher
[Double-Sided Image]
1st side: PS14
2nd side: PI6 or S3 of
the finisher
w/o finisherw/ finisher
By the pickup start signal (PCB
internal signal).
Reference:
The pickup start signal is generated
more or less at the same time as the
activation of each deck, cassette, and
manual feed tray clutch.
[Single-Sided
Image]
PS10
[Double-Sided
Image]
1st side: PS14
2nd side: PS10
[F13-5611, F13-5614, F13-5631, F13-5691, F13-5651, F13-5671, F13-5661, F13-5661,
F13-5641, F13-5601]
Ref.
[1]
[2]
[3]
[4]
Counter
Copier
Printer
Remote Diagnostic
Device II (100/120
(UL) -V areas only)
Copy Data
Controller-A1
Count
Increments the count per
copier output.
Increments per printer output.
Copier Increments per large-size
output.
The count is incremented for
copy output. (The count is not
incremented for printer output.
However, it is incremented for
an output using the mail box
requiring a card.)
Count increment
[Single-Sided Image]
PI6 or S3 of the
finisher
[Double-Sided Image]
1st side: PS14
2nd side: PI6 or S3 of
the finisher
w/o finisherw/ finisher
[Single-Sided
Image]
PS10
[Double-Side
Image]
1st side: PS14
2nd side: PS10
[F13-5621, F13-5681]
[5] Control Card V
(accessory)
The count is incremented for
copy output. (The count is not
incremented for printer output.
However, it is incremented for
an output using the mail box
requiring a card.)
By the pickup start signal (PCB
internal signal).
Reference:
The pickup start signal is generated
more or less at the same time as the
activation of each deck, cassette, and
manual feed tray clutch.
Table 9-301 Counter Operations 1
Table 9-302 Counter Operations 2