Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
11-21
CHAPTER 11 INSTALLATION
III . RELOCATING THE COPIER
If the copier must be relocated by truck or other means of transportation, perform the follow-
ing:
Caution:
A. Keep the following in mind when using stairs to deliver the copier in or out of the user's:
1. Remove the fixing/feeding unit, holding tray, and copy paper from the copier, and
transport them separately from the copier.
(If the ADF is installed, be sure to remove it also.)
2. When holding the copier, do not use the hand grips of the pickup assembly/delivery
assembly; instead, support it by grasping the four corners of its bottom.
B. Shift up the two adjusters (front) on the copier's bottom to make sure that they are un-
locked. Further, take care so that the adjusters will not slip off the copier during transpor-
tation.
C. When delivering the copier into/out of the user's, be sure to remove the accessories (side
paper deck, finisher).
Work
Make a copy in Direct.
Remove all paper from all
cassettes.
Turn off the power switch, and
disconnect the power plug from the
outlet.
Fix the No. 2 mirror mount in place
with the locking plate working
through the left cover side.
Remove the developing assembly.
Tape the transfer charging
assembly, fixing/feeding unit
releasing lever, and lower feeding
assembly in place.
Tape the front door, hopper cover,
each cassette, and main right door
(upper/lower) in place.
Place A3 copy paper on the
copyboard glass, and tape the ADF
in place.
Checks
Check to make sure that the
No. 2 mirror mount will not
move.
Transport the developing
assembly separately.
RemarksNo.
1
2
3
4
5
6
7
8