Filter
Top Products
High-performance Embedded Workshop 5. Tools Administration
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
112
To register a single component
1. Click the Register button on the Tools Administration dialog box.
2. Browse to the component’s .HRF file and click the OK button to register that component.
Note:
The High-performance Embedded Workshop registration file is located in the root directory of a component’s
installation.
5.4 Unregistering a component
The components that are registered with the High-performance Embedded Workshop affect the way it behaves. For
example, every compatible system tool that is registered will be added to the Tools menu when a new project is created.
Sometimes this may not be desirable. If this is not required, open the Tools Administration dialog box, select the
undesired component from the Registered Components list and click the Unregister button. A dialog box will be
invoked, which asks you to confirm this action. Click Yes to unregister the component.
Note:
Unregistering a component does not remove its installation from the hard disk. It simply removes the information that
the High-performance Embedded Workshop was storing about that component (i.e. it ‘disconnects’ it from the High-
performance Embedded Workshop). The action can be easily reversed at any time by registering the tool manually (see
section 5.3, Registering a component).
5.5 Viewing and editing component properties
To view information regarding a component, select it from the Registered Components list on the Tools
Administration dialog box and click the Properties button. The Properties dialog box opens.
The General tab displays the name, version and location of the selected component.
Select the Information tab to view any information about the component. This may include copyright information,
enhancements and so on.