Filter
Top Products
High-performance Embedded Workshop 2. Build Basics
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
53
Note:
Do NOT assume that any output from the tool you terminated is valid. It is recommended that you delete any output
files produced and ensure that the phase is executed again.
2.8.5 Deleting intermediate and output files produced in building
You
can delete intermediate and output files (produced in building) included in the current configuration in the project.
To delete intermediate and output files included in the current configuration in the project
Select one of the following operations:
• Select [Build -> Clean Current Project], OR
• Right-click on a project in the Projects tab of the workspace window. Select [Build -> Clean Current
Project] from the pop-up menu.
A confirmation dialog opens for you to select whether or not to delete all intermediate and output files produced in
building. To delete all files, select Yes. Otherwise select No or Cancel.
If you do not wish to open this confirmation dialog box, select the Don’t ask this question again checkbox.
To open the confirmation dialog box again
1. Select [Setup -> Options]. The Options dialog box opens.
2. Select the Confirmation tab.
3. Select the Clean project checkbox. This checkbox is selected by default.
4. Click OK.
To delete intermediate and output files in all projects of the workspace
Select one of the following operations:
• Click the Clean All Projects toolbar button (
), OR
• Select [Build -> Clean All Projects], OR
• Right-click on a workspace in the Projects tab of the workspace window. Select [Clean All Projects] from the
pop-up menu.
A confirmation dialog opens for you to select whether or not to delete all intermediate and output files produced in
building. To delete all files, select Yes. Otherwise select No.