Filter
Top Products
High-performance Embedded Workshop 16. Using the Test Support Facility
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
249
Test group name Symbol
Test item name CWatch
Test-image data to be
saved into test-image files
Values set as detailed information and the range of data in the CWatch window acquired with this setting.
Checkboxes for all variables are blank by default.
Failed at xxx , data value is
different:
Name of the unmatched variable
Src Content of the test-image file
Dest Data in the current High-performance Embedded Workshop system or in
another test-image file to be compared with
Test result details
Example Failed at (a)[0] ([Global]), data value is different: Src = 1783, Dest = 0
To make detailed setting
If you double-click on a test item in the Create New Test Image dialog box, a further dialog box for detailed setting
opens.
• To add a variable
1. Click on the Add button on the Edit Test C Variables dialog box to open the Add Variables dialog box, in
which variables can be added in units of scopes.
2. The Scope drop-down list contains Global, Local, and file names. Variables shown in the Name list depend
on the selection made in the Scope drop-down list. The Name list shows global variables when Global has