Filter
Top Products
High-performance Embedded Workshop 17. Using the Debugger
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
312
• In-place edit in the Code column.
• To change the contents of memory, open the Set dialog box by selecting one of the following operations:
o Double-click the Data column you want to change, OR
o Double-click the Code column you want to change, OR
o Select the data you want to change and choose Set from the pop-up menu.
Enter the value (value or character) to be set in the Data field. Select the Verify check box. Support for verify
function depends on the debugger.
When setting the value
Click the Value button in the Data Type group. Specify the data length in the Length field.
When setting the character
Click the String button in the Data Type group. Specify the character code in the Code field.
17.3.3 Selecting a memory range
If t
he memory address range is in the Memory view, you can select the range by clicking on the first memory unit
(depending on your Memory view display choice) and dragging the mouse to the last unit. The selected range is
highlighted.