Filter
Top Products
High-performance Embedded Workshop 2. Build Basics
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
50
2.7.1 Selecting a build configuration
To select the current configuration
1. Select [Build -> Build Configurations]. The Build Configurations dialog box opens.
2. Select the build configuration that you want to use from the Current Configuration drop-down list.
3. Click the OK button.
You can also select a different build configuration by selecting it from the Current Configuration drop-down list on the
Standard toolbar.
2.7.2 Adding a new build configuration
To add a new build
configuration
1. Select [Build -> Build Configurations]. The Build Configurations dialog box opens.
2. Click the Add button. The Add Configuration dialog box opens.
3. Enter the new build configuration name into the Configuration name field. As you enter the new build
configuration name, the directory underneath changes to reflect the configuration directory that will be used.
4. Select one of the existing build configurations, on which you want to base the new build configuration, from
the Based on configuration drop-down list.
5. Click the OK buttons on both dialogs to complete the creation of the new build configuration.
2.7.3 Removing a build configuration
To
remove a build configuration
1. Select [Build -> Build Configurations]. The Build Configurations dialog box opens.
2. Select the build configuration to remove and click the Remove button.
3. Click the OK button to close the Build Configurations dialog box.