Filter
Top Products
High-performance Embedded Workshop 17. Using the Debugger
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
354
Click the Launch External Debugger toolbar button ( ) to invoke the debugger with the specified session file.
After a build, if the download module has been updated, the High-performance Embedded Workshop will switch back
to the debugger to enable immediate debugging. Whilst using an external debugger, double-clicking in any editor
window will switch back to the High-performance Embedded Workshop with the source file open at the line that was
double-clicked.
17.16.1 Configuring the Hitachi Debugging Interface to integrate with High-performance Embedded
Work
shop
The following details the information required to setup the Hitachi Debugging Interface to integrate with High-
performance Embedded Workshop and launch from the external debugger option in High-performance Embedded
Workshop.
To configuring the Hitachi Debugging Interface to integrate with High-performance Embedded Workshop
1. Firstly, the location of the debugger executable must be specified. This must be version Hitachi Debugging
Interface 4.0 or greater, otherwise its behavior is not guaranteed. This may have been configured by the
installation program or a project generation utility.
2. The second item of data is the session file. This tells the debugger which session to load when it is launched.
3. Finally, the location of the download module is required. This allows the High-performance Embedded
Workshop to automatically switch to the debugger when the download module changes after a build.
17.16.2 Configuring the PD debugger to integrate with High-performance Embedded Workshop
Th
e following details the information required to setup the PD debugger to integrate with High-performance Embedded
Workshop and launch from the external debugger option in High-performance Embedded Workshop.