Filter
Top Products
High-performance Embedded Workshop 18. Synchronized Debugging
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
385
Step In Step “Debug->Step In” menu.
Step In toolbar button.
“step” command.
Performs step in on all synchronized platforms.
Step Over Step “Debug->Step Over” menu.
Step Over toolbar button.
“step_over” command.
Performs step over on all synchronized
platforms.
Step Out Step “Debug->Step Out” menu.
Step Out toolbar button.
“step_out” command.
Performs step out on all synchronized platforms.
Connect Connection “Debug->Connect” menu.
Connect toolbar button.
“connect” command or platform specific command.
Connects to the platform in all synchronized
Debuggers.
Download
(file load)
Download
modules
“Debug->Download Modules” menu item.
Workspace tab “Download modules” folder.
“file_load” command.
On connection when “Download automatically on target
connection” option is set.
After build when “Download modules after build” option is
set.
When a module is modified externally to High-performance
Embedded Workshop.
Downloads the module to all synchronized
platforms. The module filename must be the
same in each Debugger.
Initialize Initialize “Debug->Initialize” menu.
“initialize” command.
All synchronized platforms will be initialized.
Regarding stepping, the style of step performed (source or instruction) in a synchronized Debugger will be determined
by the program counter, step mode and editor cursor position in that Debugger and not the Debugger where the
operation was initiated. Each individual Debugger will effectively act as if the step operation had been executed locally
by the normal High-performance Embedded Workshop method (e.g. toolbar button).
Regarding download, the operation will only be synchronized with Debuggers that have modules with the same
filename as the module in the initiating Debugger. If a Debugger contains more than one module then only the one with
the matching filename will be downloaded.
Unless specifically mentioned, all other Debugger operations, and other non Debugger High-performance Embedded
Workshop operations, are possible while synchronized debugging. But they will only be executed on the initiating
platform and not synchronized with other platforms.
Debug Settings dialog box