Filter
Top Products
High-performance Embedded Workshop 3. Advanced Build Features
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
74
3.3.3 File Mappings tab
By default, the files input to a build phase are only taken from the project, i.e. all project files of the type specified in
the Select input file group drop-down list on the New Build Phase dialog box. Select [Build -> Build Phases]. The
Build Phases dialog box will be displayed. If you would like a build phase to take files output from a previous build
phase (these files are called intermediate files), then you must define this in the File Mappings tab of the Build Phases
dialog box.
A File Mapping means that you would like the output files of a certain type produced by one build phase (referred to as
the Source phase) to another build phase (referred to as the Destination phase). Such intermediate files are then passed
in addition to the project files.
To add a file mapping
1. Click the Add button. The Define File Mapping dialog box opens.
2. Select an existing file group to use for the new mapping from the File group drop-down list.
3. Select the source phase (i.e. the phase that generates the files) from the Source phase drop-down list.
4. Select the destination phase (i.e. the phase that takes these files) from the Destination phase drop-down list.
5. Click the OK button to create the new mapping.
To modify a file mapping
1. Select the mapping to be modified.
2. Click the Modify button. The Define File Mapping dialog box opens.
3. Modify the options as necessary.
4. Click the OK button to commit the changes.
To remove a file mapping
1. Select the mapping to be removed.
2. Click the Remove button.
3. Click the OK button to commit the changes.