Filter
Top Products
High-performance Embedded Workshop 17. Using the Debugger
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
269
8. Set the options for the debugger targets selected in Step 8.
Core: Specifies the target core.
Configuration name: By default, the High-performance Embedded Workshop generates two configurations:
Release and Debug. If a debugger target is selected, a configuration for the selected
target is also generated (an abbreviation including the target name). This configuration
name can be changed in Configuration name.
Sets the debugger target options. To modify an option, select Item and click Modify. If
the selected item cannot be modified, Modify remains gray even when Item is
selected.
Simulator I/O: System call for standard I/O or file I/O from the user
program is enabled (Enable) or disabled (Disable).
Simulator I/O addr.: Address for above system call.
Bus mode: Currently cannot be used by the simulator/debugger.
Detail options:
Initial session: If Initial session is checked, this session becomes an initial
session.
To move to Step 9, click the Next> button in Step 8.