Filter
Top Products
High-performance Embedded Workshop 17. Using the Debugger
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
282
To automatically download an existing module to the target when adding it to the Download modules list
1. Select one of the following operations to open the Download Module dialog box:
• Select [File -> Download A New Module], OR
• Right-click on a module or within the Download modules folder on the Projects tab of the workspace window
to display a pop-up menu. Select Download A New Module.
All fields must be setup for the download module to be configured correctly.
2. The Offset field specifies the memory address offset the module will be loaded at. It defaults to 0. After the
module has been added, the offset value is shown on the right of the module name in the [Debug -> Build]
submenu, the Download modules folder on the Projects tab of the workspace window, and the [File ->
Recently Downloaded Modules] submenu.
3. The File format drop-down list box contains a list of supported object format. The file format of the download
module is selected here. So this does not have to match the debug format on the Debug Settings dialog box.
However, the Stack Trace window will be supported for instance depending on the format specified in the
Debug format field.
4. The Filename field can be specified with placeholders or as an absolute setting. It is recommended to use
placeholders.
5. The Access size field specifies the access size when the memory is accessed. If the memory needs to be
accessed by a specific access size, specify the access size by using this option.
6. The Download debug information only checkbox can be used when you wish to download the debugging
information.
7. The Perform memory verify during download checkbox can be used to do additional checks when
downloading the module to ensure it was correctly downloaded to the target device.
8. The Download automatically on target connection checkbox can be used to automatically download the
module when the target is being connected.
9. Click the OK button.
Select [Debug -> Debug Settings]. The Debug Settings dialog box will be invoked. The module is added to the bottom
of the Download modules list on the Target tab.
If a module previously downloaded is modified outside the High-performance Embedded Workshop, a confirmation
dialog box appears asking if you wish to download this module again. To download the module again, select Yes.
Otherwise select No or Cancel.