Filter
Top Products
High-performance Embedded Workshop 17. Using the Debugger
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
311
Lock Refresh - - Disables refresh of the Memory window.
Auto Refresh *2
- Regularly refreshes the Memory window.
Refresh Interval *2
- Specifies the refresh interval.
1byte
- Data is displayed in 1-byte units.
2bytes
- Data is displayed in 2-bytes units.
4bytes
- Data is displayed in 4-bytes units.
Data Length
8bytes
- Data is displayed in 8-bytes units.
Hex
- Data is displayed in hexadecimal.
Dec
- Data is displayed in decimal.
Signed Dec
- Data is displayed in signed decimal.
Oct
- Data is displayed in octal.
Radix
Bin
- Data is displayed in binary.
ASCII
- Displays memory as ASCII characters (default).
SJIS/JIS/UNICODE/EUC - - Not supported.
Float
- Displays memory as single-precision floating point.
Double
- Displays memory as double-precision floating point.
16bit Fixed
- Displays memory as 16 bit fixed.
32bit Fixed
- Displays memory as 32 bit fixed.
24bit Accum - - Displays memory as 24 bit accumulate.
Code
40bit Accum - - Displays memory as 40 bit accumulate.
Label
- Switches display or non-display of Label area.
Register
- Switches display or non-display of Register area.
Layout
Code
- Switches display or non-display of Code area.
Column
- Changes the number of digits displayed.
Coverage *1 Enable
- Switches display or non-display of measurement result.
Save
Saves memory contents in a file.
Load
Loads a memory area contents from a file.
Split - - Splits up the window display.
Toolbar display - - Shows or hides the toolbar.
Customize toolbar - - Customizes toolbar buttons.
Note:
*1. Support for this function depends on the debugger.
*2. Available only when the debugger supports this function.
17.3.2 Modifying memory contents
To c
hange the contents of memory, follow the procedure below.
• In-place edit in the Data column.