Filter
Top Products
show ipv6 fib stack-unit
View all FIB entries.
S4820T
Syntax
show ipv6 fib [vrf vrf-name] stack-unit unit-number [summary |
ipv6-address]
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the
VRF to display neighbors corresponding to that VRF.
slot-number Enter the number of the stack unit.
summary (OPTIONAL) Enter the keyword summary to view a summary
of entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display
networks that have more specific prefixes. The range is
from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
Usage
Information
Host tables are not stored in CAM tables on S-Series platforms. Entries for
camIndex displays as zero (0) on the show ipv6 fib stack-unit output for
neighbor entries, such as address resolution protocol (ARP) entries.
1004
IPv6 Basics