Filter
Top Products
Example
Dell#show hosts
Default domain is not set
Name/address lookup uses static mappings
Name servers are not set
Host Flags TTL Type Address
-------- ----- ---- ---- -------
ks (perm, OK) - IP 2.2.2.2
4200-1 (perm, OK) - IP 192.68.69.2
1230-3 (perm, OK) - IP 192.68.99.2
ZZr (perm, OK) - IP 192.71.18.2
Z10-3 (perm, OK) - IP 192.71.23.1
Dell#
Related
Commands
traceroute — views the DNS resolution.
ip host — configures a host.
show ip cam linecard
View CAM entries for a port pipe on a line card.
S4820T
Syntax
show ip cam linecard number port-set pipe-number [ip-address
mask [longer-prefixes] | index index-number | summary | vrf vrf
instance]
Parameters
number Enter the number of the line card.
pipe-number Enter the number of the line card’s port-pipe. The range is
from 0 to 1.
ip-address
mask [longer-
prefix]
(OPTIONAL) Enter the IP address and mask of a route to
CAM entries for that route only. Enter the keyword longer-
prefixes
to view routes with a common prefix.
index index-
number
(OPTIONAL) Enter the keyword index then the CAM index
number. The range depends on CAM size.
summary (OPTIONAL) Enter the keyword summary to view a table
listing route prefixes and the total number of routes that can
be entered into the CAM.
vrf instance (OPTIONAL) E-Series Only: Enter the keyword vrf then the
VRF instance name to show CAM information as it applies to
that VRF instance.
Command
Modes
• EXEC
• EXEC Privilege
IPv4 Routing
943