Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
interface
interface
(OPTIONAL) Enter the keyword interface then the
interface type, slot and port information:
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to
display the MAC address assigned to the VLAN. The range is
from 1 to 4094.
Command
Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
pre-6.2.1.1 Introduced on the E-Series.
Usage
Information
MAC Accounting information can be accessed using SNMP via the Force10 Monitor
MIB. For more information about enabling SNMP, refer to the Dell Networking OS
Configuration Guide.
NOTE: Currently, the Force10 MONITOR MIB does not return the MAC
addresses in an increasing order using SNMP. As a workaround, you can use
the -C c option in snmpwalk or snmpbulkwalk to access the Force10
MONITOR MIB. For example: % snmpwalk -C c -v 2c -c public 133.33.33.131
enterprise.6027.3.3.3
Example
Dell-1#show mac accounting destination interface
tengigabitethernet 2/1
Destination Out Port VLAN Packets Bytes
00:44:00:00:00:02 Te 11/1 1000 10000 5120000
00:44:00:00:00:01 Te 11/1 1000 10000 5120000
00:22:00:00:00:00 Te 11/1 1000 10000 5120000
00:44:00:00:00:02 Te 11/1 2000 10000 5120000
00:44:00:00:00:01 Te 11/1 2000 10000 5120000
Dell-1#
1122
Layer 2