Filter
Top Products
Usage
Information
To display information about a named VLAN, enter the show vlan command with
the name parameter or the show interfaces description command.
Related
Commands
interface vlan — configures a VLAN.
show vlan — displays the current VLAN configurations on the switch.
show config
Display the current configuration of the selected VLAN.
S4820T
Syntax
show config
Command
Modes
INTERFACE VLAN
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Example
Dell(conf-if-vl-100)#show config
!
interface Vlan 100
no ip address
no shutdown
Dell(conf-if-vl-100)#
Layer 2
1127