Filter
Top Products
Related
Commands
forward-delay — changes the wait time before RSTP transitions to the Forwarding
state.
max-age — changes the wait time before RSTP refreshes the protocol
configuration information.
max-age
To maintain configuration information before refreshing that information, set the time interval for the
RSTP bridge.
Syntax
max-age seconds
To return to the default values, use the no max-age command.
Parameters
max-age Enter a number of seconds the Dell Networking OS waits
before refreshing configuration information. The range is
from 6 to 40 seconds. The default is 20 seconds.
Defaults 20 seconds
Command
Modes
CONFIGURATION RSTP (conf-rstp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Related
Commands
forward-delay — changes the wait time before RSTP transitions to the Forwarding
state.
1564
Rapid Spanning Tree Protocol (RSTP)