Filter
Top Products
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Example
Dell#debug track all
04:35:04: %RPM0-P:RP2 %OTM-5-STATE: track 6 - Interface
TenGigabitEthernet 1/2
line-protocol DOWN
04:35:04: %RPM0-P:RP2 %OTM-5-NOTIF: VRRP notification:
resource ID 6 DOWN
delay
Configure the time delay used before communicating a change in the status of a tracked object to
clients.
Syntax
delay {[up seconds] [down seconds]}
To return to the default setting, use the no delay command.
Parameters
seconds Enter the number of seconds the object tracker waits before
sending a notification about the change in the UP and/or
DOWN state of a tracked object to clients. The range is 0 to
180. The default is 0 seconds.
Defaults 0 seconds
Command
Modes
OBJECT TRACKING (conf_track_object-id)
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage
Information
You can configure an UP and/or DOWN timer for each tracked object to set the
time delay before a change in the state of a tracked object is communicated to
clients. The configured time delay starts when the state changes from UP to
DOWN or vice-versa.
Object Tracking
1241