Filter
Top Products
threshold-
value
Buffer limit at which the port sends the pause to peer in KB.
Enter a number in the range of 0 to 7787. The default is 10
KB.
resume-offset Buffer offset limit for resuming in KB
threshold-
value
Buffer offset limit at which the port resumes the peer in KB.
Enter a number in the range of 1 to 7787. The default is 10
KB.
shared-
threshold-
weight
Buffer shared threshold weight
size Weightage of the priorities on the shared buffer size in the
system. Enter a number in the range of 0 to 9. The default
shared threshold weight is 10.
Default The default size of the ingress buffer is 45 KB. The default buffer limit at which the
port sends the pause to peer and recommences the sending of packets to the peer
is 10 KB. The default threshold weight of the shared buffer space is 10.
Command
Modes
DCB-BUFFER-THRESHOLD mode
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S4810, S4820T, S6000, and MXL
platforms.
Usage
Information
You must apply this buffer policy at the interface level for the attributes to be
applicable in conjunction with the DCB input policy.
For each QoS policy buffer, you can specify the shared buffer threshold limit, the
ingress buffer size, buffer limit for pausing the acceptance of packets, and the
buffer offset limit for resuming the acceptance of received packets. When PFC
detects congestion on a queue for a specified priority, it sends a pause frame for
the 802.1p priority traffic to the transmitting device.
You can use set up both the administrative and peer-related PFC priorities. For
example, you can configure the intended buffer configuration for all 8 priorities. If
you configure the number of lossless queues as 4 and if the administrator-
configured priorities configured within the DCB input policy is applied, then the
configuration for those priorities are pre-designed. However, if the peer-provided
priorities are applied, although a DCB input policy is present, the peer-provided
priorities become effective for buffer configuration. This method of configuration
provides an easy and flexible technique to accommodate both administratively-
configured and peer-configured priorities.
Example
Dell(conf)# qos-policy-buffer test
604
Data Center Bridging (DCB)