Filter
Top Products
policy-map-input — creates an input policy map.
service-policy rate-limit-protocols
Apply a policy for the system to rate limit control protocols on a per-protocol basis.
S4820T
Syntax
service-policy rate-limit-protocols policy-name
Parameters
policy-name Enter the service-policy name, using a string up to 32
characters.
Defaults Not configured.
Command
Modes
CONTROL-PLANE-CPUQOS
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Usage
Information
This command applies the service-policy based on the type of protocol defined in
the ACL rules.
Create ACL and QoS policies prior to enabling this command.
For CoPP, use the keyword cpu-qos when creating qos-policy-input.
Related
Commands
ip access-list extended — creates an extended IP ACL.
mac access-list extended — creates an extended MAC ACL.
qos-policy-input — creates a QoS input policy map.
class-map — creates a QoS class map.
Control Plane Policing (CoPP)
553