Filter
Top Products
• For OSPF, you can set the resolution in the range 1 to 1592, where the default is
1.
• The resolution value used to map static routes is not configurable. By default,
Dell Networking OS assigns a metric of 0 to static routes.
• The resolution value used to map RIP routes is not configurable. The RIP hop-
count is automatically multiplied by 16 to scale it. For example, a RIP metric of
16 (unreachable) scales to 256, which considers the route to be DOWN.
Related
Commands
• threshold metric – configures the metric threshold used to determine the UP
and/or DOWN state of a tracked route.
• track ip route metric threshold – configures object tracking on the threshold of
an IPv4 route metric.
IPv6 Object Tracking Commands
The following section describes the IPv6 object tracking commands.
The following object tracking commands apply to IPv4 and IPv6:
• debug track
• delay
• description
• show running-config track
• threshold metric
• track interface line-protocol
show track ipv6 route
Display information about all tracked IPv6 routes, including configuration, current tracked state (UP or
DOWN), and the clients which are tracking an object.
Syntax
show track ipv6 route [brief]
Parameters
brief (OPTIONAL) Display a single line summary of information for
tracked IPv6 routes.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
Object Tracking
1253