Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
md5 | sha (OPTIONAL) Enter the keyword md5 or sha to designate the
authentication level.
md5 — Message Digest Algorithm
sha — Secure Hash Algorithm
auth-password (OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the agent to receive packets from the
host. Minimum: eight characters long.
priv (OPTIONAL) Enter the keywords priv to initiate a privacy
authentication level setting.
des56 | aes128 (OPTIONAL) Enter the keyword des56 or aes128 to specify
the encryption mode.
aes128 — Use 128 bit AES algorithm in CFB mode for
encryption.
des56 — Use 56 bit DES algorithm in CBC mode for
encryption.
priv password (OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the host to encrypt the contents of
the message it sends to the agent. Minimum: eight
characters long.
access access-
list-name
(Optional) Enter the standard IPv4 access list name (a string
up to 16 characters long).
ipv6 access-
list-name
(Optional) Enter the keyword ipv6 then the IPv6 access list
name (a string up to 16 characters long).
access-list-
name ipv6
access-list-
name
(Optional) Enter both an IPv4 and IPv6 access list name.
Defaults As above.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.6.(0.0) Added aes 128 encryption algorithm parameter.
9.4.(0.0) Added support for VRF.
Simple Network Management Protocol (SNMP) and Syslog
1713